ASTM NDT 标准目录

E569 - 07

Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation

E650 - 97(2007)

Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors

E749 - 07

Standard Practice for Acoustic Emission Monitoring During Continuous Welding

E750 - 10

Standard Practice for Characterizing Acoustic Emission Instrumentation

E751 - 07

Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding

E976 - 10

Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response

钢筋混凝土E1067 - 07

Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels

E1106 - 07

Standard Test Method for Primary Calibration of Acoustic Emission Sensors

E1118 - 05

Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)

E1139 - 07

Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries

E1211 - 07

Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors

E1419 - 09

Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission

E1495 - 02(2007)

Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints

E1736 - 10

Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels

E1781 - 08

Standard Practice for Secondary Calibration of Acoustic Emission Sensors

E1888 / E1888M - 07

Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores

E1930 - 07

Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission

E1932 - 07

Standard Guide for Acoustic Emission Examination of Small Parts

E2075 / E2075M - 10

Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod

E2076 / E2076M - 10

Standard Test Method for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission

E2191 / E2191M - 10

Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission

E2374 - 10

Standard Guide for Acoustic Emission System Performance Verification

E2478 - 06a

Standard Practice for Determining Damage-Based Design Stress for Fiberglass Reinforced Plastic (FRP) Materials Using Acoustic Emission

E2598 - 07

Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers

E2661 / E2661M - 10

Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications

E1453 - 09

Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data

E1454 - 02(2008)

Standard Guide for Data Fields for Computerized Transfer of Digital Ultrasonic Testing Data

E1475 - 02(2008)

Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data

E2339 - 10

Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)

E2663 - 08

Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods

E2699 - 10

Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods

E2738 - 10

Standard Practice for Digital Imaging and Communication Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods

E2767 - 10

Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods

E1316 - 10c

Standard Terminology for Nondestructive Examinations

E215 - 98(2004)e1

Standard Practice for Standardizing Equipment for Electromagnetic Examination of Seamless Aluminum-Alloy Tube

E243 - 09

Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper and Copper-Alloy Tubes

E309 - 95(2006)

Standard Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation

E376 - 06

Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Examination Methods

E426 - 98(2007)

Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Austenitic Stainless Steel and Similar Alloys

E566 - 09

Standard Practice for Electromagnetic (Eddy-Current) Sorting of Ferrous Metals

E570 - 09

Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products

E571 - 98(2007)e1

Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products

E690 - 10

Standard Practice for In Situ Electromagnetic (Eddy-Current) Examination of Nonmagnetic Heat Exchanger Tubes

E703 - 09

Standard Practice for Electromagnetic (Eddy-Current) Sorting of Nonferrous Metals

E1004 - 09

Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method

E1033 - 09

Standard Practice for Electromagnetic (Eddy-Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature

E1312 - 09

Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature

E1571 - 06

Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope

E1606 - 09

Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper Redraw Rod for Electrical Purposes

E1629 - 07

Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes

E2096 / E2096M - 10

Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing

E2261 - 07

Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique

E2337 / E2337M - 10

Standard Guide for Mutual Inductance Bridge Applications for Wall Thickness Determinations in Boiler Tubing

E2338 - 06

Standard Practice for Characterization of Coatings Using Conformable Eddy-Current Sensors without Coating Reference Standards

E427 - 95(2006)

Standard Practice for Testing for Leaks Using the Halogen Leak Detector(Alkali-Ion Diode)

E432 - 91(2004)

Standard Guide for Selection of a Leak Testing Method

E479 - 91(2006)

Standard Guide for Preparation of a Leak Testing Specification

E493 - 06

Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode

E498 - 95(2006)

Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode

E499 - 95(2006)

Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode

E515 - 05

Standard Test Method for Leaks Using Bubble Emission Techniques

E908 - 98(2004)

Standard Practice for Calibrating Gaseous Reference Leaks

E1002 - 05

Standard Test Method for Leaks Using Ultrasonics

E1003 - 05

Standard Test Method for Hydrostatic Leak Testing

E1066 - 95(2006)

Standard Test Method for Ammonia Colorimetric Leak Testing

E1603 - 99(2006)

Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode

E2024 - 05

Standard Test Methods for Atmospheric Leaks Using a Thermal Conductivity Leak Detector

E125 - 63(2008)

Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings

E165 - 09

Standard Practice for Liquid Penetrant Examination for General Industry

E433 - 71(2008)

Standard Reference Photographs for Liquid Penetrant Inspection

E709 - 08

Standard Guide for Magnetic Particle Testing

E1135 - 97(2008)e1

Standard Test Method for Comparing the Brightness of Fluorescent Penetrants

E1208 - 10

Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process

E1209 - 10

Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process

E1210 - 10

Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process

E1219 - 10

Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process

E1220 - 10

Standard Practice for Visible Penetrant Testing Using
Solvent-Removable Process

E1417 - 05e1

Standard Practice for Liquid Penetrant Testing

E1418 - 10

Standard Practice for Visible Penetrant Testing Using the Water-Washable Process

E1444 - 05

Standard Practice for Magnetic Particle Testing

E2297 - 04(2010)

Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods